Showing posts with label X-Ray Laser. Show all posts
Showing posts with label X-Ray Laser. Show all posts

Sunday, August 26, 2012

Ultrafast Pulsed Lasers


A Navy ship at sea is surrounded by water, with nothing but its carrier group in site, and searches the skies for activity overhead.

Isolated radars on each ship in the group scan independently of each other with limited effectiveness. But consider if all of the ships’ radars could be coherently linked to function as one.

Such a capability would improve the range and resolution of each radar system, making it possible to identify and characterize objects further away and with greater fidelity.

Conventional X-ray machines provide images of bones and organs that help doctors make crucial decisions regarding patient care. They cannot, however, resolve structures at the cellular level.

Imagine having access to a table-top x-ray imager that could not only image a single cell, but also the nucleus, ribosomes and other components that make it up; and not only as a flat image, but in 3-D. Such information would be invaluable for testing responses to candidate drugs and discovering new treatments.

These two very different applications are not science fiction and could be enabled by the same basic technology: ultrafast, pulsed lasers operating at optical wavelengths.

These kinds of pulsed lasers are known as frequency combs because they are composed of thousands of individual laser lines, equally separated in frequency like the teeth of a comb. DARPA seeks to control the entire electromagnetic spectrum by using frequency combs to generate and engineer waves in the optical domain and then down or up-convert those waveforms to the desired wavelength.

Such technology has many potential applications relevant to the Department of Defense (DoD), such as low phase noise microwave oscillators for secure communications, explosive and chemical agent detection, and the production of attosecond (10-18s) pulses for imaging the motion of electrons in complex materials.

Many of the techniques that underlie these applications have been demonstrated, but are currently unsuitable for practical use because they are restricted to a laboratory setting. DARPA’s Program in Ultrafast Laser Science and Engineering (PULSE) aims to enable synchronization, metrology and communications applications for DoD by advancing compact, high power and environmentally insensitive frequency comb technology, as well as the science underlying these applications.

Achieving these goals will require input from researchers across a broad spectrum of disciplines. Potential proposers are encouraged to review and respond to the PULSE Broad Agency Announcement (BAA).

“PULSE is a basic research program initially focused on component technology. Our primary concern isn’t demonstrating a specific application, rather making these tools a reality at a practical scale by overcoming current obstacles like size and thermal management,” said Jamil Abo-Shaeer, DARPA program manager for PULSE. “The range of potential applications is enormous. Literally any technology that uses electromagnetic radiation could be impacted.”

Low phase noise microwave oscillators represent one potential application of the high frequency stability provided by optical frequency combs. Under PULSE, DARPA will pursue enabling technologies to reduce comb size. One possible approach involves recently demonstrated, chip-based optical frequency combs that were generated from micron-scale optical resonators.

However, while such combs potentially offer a vast reduction in form-factor compared with conventional technology, they have yet to demonstrate the stability and bandwidth required for low phase noise microwave oscillator production.

At the other end of the spectrum, PULSE will explore how to capitalize on the high intensity obtainable from pulsed lasers for applications like x-ray imaging. PULSE aims to enhance the capabilities of tabletop, high-peak power, pulsed-laser driven x-ray generation techniques; these sources should produce high flux, coherent x-rays with wavelengths in the water-window (2.3 to 4.4 nm) for biological imaging applications.  At present, these types of x-rays can only be generated by a few building-sized machines, thus limiting the range of applications.

Proposers are sought for the development of ultrafast laser science applications, including microwave generation, optical time-transfer, laser-driven secondary radiation generation and attosecond science.

As a fundamental research program, PULSE welcomes proposals from U.S. and international researchers and is expected to span over a five year time-scale. For detailed information, please review the BAA.  Proposal abstracts are due by 4:00 PM ET, September 6, 2012. Full proposals are due by 4:00 PM ET, November 6, 2012.

Information for this story provided by DARPA

Friday, December 10, 2010

Intergalactic Weather Map

This composite image shows an intergalactic "weather map" around the elliptical galaxy NGC 5813, the dominant central galaxy in a galaxy group located about 105 million light years away from Earth. Just like a weather map for a local forecast on Earth, the colored circle depicts variations in temperature across a region. This particular maps presents the range of temperature in a region of space as observed by NASA's Chandra X-ray Observatory, with the hotter temperatures shown in red and decreasingly cooler temperatures shown in orange, yellow, green, and blue.

A notable feature of this image is the relatively small variation in temperature across the weather map, with a range of only about 30% across several hundred thousand light years. Without any sources of heat, the densest gas near the center of the map should cool to much lower temperatures as energy is lost because of radiation. However, regular outbursts generated by the supermassive black hole at the center of NGC 5813 provide heat, preventing the gas near the center of the galaxy from cooling to such low temperatures. This decreases the amount of cool gas available to form new stars. This process is analogous to the sun providing heat for Earth's atmosphere and preventing water and water vapor from cooling and freezing.

How do outbursts generated by the black hole provide heat? Powerful jets produced as gas swirls toward the black hole push cavities into the hot gas and drive shock waves -- like sonic booms -- outwards, heating the gas. The shocks from the most recent outburst, which occurred about 3 million years ago in Earth’s time frame, show up as a "figure eight" structure at the center of the image. This is the first system where the observed heating from shocks alone is sufficient to keep the gas from cooling indefinitely. These shocks allow the relatively tiny black hole to heat the huge area surrounding it, as shown here.

The gas around NGC 5813 shows evidence for three distinct outbursts from the black hole, which occurred 3 million, 20 million and 90 million years ago, in Earth's time frame. The average power of the two most recent outbursts differ by about a factor of six, showing that the power delivered by the jets can vary significantly over timescales of about 10 million years.

A paper describing these results has been accepted for publication in the Astrophysical Journal. The first author of the paper is Scott Randall from the Harvard-Smithsonian Center for Astrophysics (CfA) and the co-authors are Bill Forman from CfA; Simona Giacintucci from CfA and INAF in Bologna, Italy; Paul Nulsen from CfA; Ming Sun from the University of Virginia; Christine Jones from CfA; Eugene Churazov from the Max Planck Institute for Astrophysics in Garching, Germany and the Space Research Institute in Moscow, Russia; Larry David and Ralph Kraft from CfA; Megan Donahue from Michigan State University; Elizabeth Blanton from Boston University; and Aurora Simionescu and Norbert Werner from Stanford University.

Credits: X-ray: NASA/CXC/SAO/S.Randall et al., Optical: SDSS

Friday, April 16, 2010

Next Generation of X-Ray Laser

Defense Fellow Building Next Generation of X-Ray Laser


April 16, 2010 - Dr. Margaret Murnane is a faculty member at the University of Colorado and a National Security Science and Engineering Faculty Fellow. She runs a joint research group with her husband, Dr. Henry Kapteyn, and credits their success to teamwork.

2010 is the 50th anniversary of the first demonstration of the laser — an advance that has transformed our lives in many wonderful ways. It is also a very special year for my husband Henry and me.

We met as graduate students together at Berkeley, studying in the same field and in the same group. Many people told us that we had no hope of ever getting faculty positions together because no university would ever hire two people in the same field. Fortunately, Washington State University (WSU) did. And, even better, they were fine with us working together.

At WSU, we developed the fastest lasers in the world at the time – under 10 femtoseconds (< 0.000000000000001 sec). We also figured out how to compress all the laser energy into a light pancake that was a few millimeters in diameter and only 3 microns thick! By comparison, a human hair averages 50 microns in diameter.

Teamwork was essential – we had a team of students with whom we celebrated our successes and supported each other. We worked faster and harder because we worked together.

Moving next to the University of Michigan and then to Colorado, we continued to run a joint group and benefit from many wonderful collaborations. Clearly, teamwork and openness to new ideas and other fields has helped us learn, brainstorm and overcome challenges.

This year, we are very excited because our team has finally figured out how to make a coherent or laser-like version of the x-ray tube in a small setup that eventually could be in widespread use. Like lasers, x-rays have transformed our lives by uncovering the double helix structure of DNA, helping doctors diagnose fractures and disease, and making air travel more secure. The images taken using x-ray tubes, however, are nowhere near as sharp as the wavelength of the x-rays. This is because x-ray tube technology is more like a bright x-ray flashlight or light bulb than a laser. Synchtrotron sources are another, brighter x-ray source useful for science, but housed in machines so large and expensive that their versatility is limited.



Margaret and Henry (center) meeting with high school and undergraduate students working in their laboratory during the summer. (Courtesy photo)

To generate coherent, laser-like beams of x-rays, we determined how to combine many ultra-fast laser photons together in a reasonably efficient way and generate coherent x-ray beams from a visible laser. Building an x-ray laser takes enormous power. Thus, it is easier to start with a visible laser and use nonlinear optics to upshift the laser light from the visible into the x-ray region.

To do this, we developed a new area of nonlinear optics of x-ray generation. So far, we have studied how the electron cloud in a chemical bond changes shape as a molecule breaks apart, measured how fast a magnetic material can flip orientation, followed how fast heat flows in a nanocircuit, and built a table-top microscope that does not need lenses.

How far can we go? It may be possible to generate bright beams of coherent hard x-rays and revolutionize crystallography, and biological, materials, and medical imaging. In theory, efficient conversion to very short wavelengths < 1 nm (corresponding to very high > 10keV photon energies) is possible, guaranteeing more exciting advances in lasers.

These achievements will require more of what we’ve benefited from all along: Partnerships and teamwork. From our start at WSU, I have learned that together we have a great chance to transform science.